Transmitter for Premiere Pro
  • Jorge SantosJorge Santos

    It doesn't work in premiere 2023, I want to transmit and the transform effect is not created.
  • Leyero ShLeyero Sh

    It doesn't work in premiere 2023, I want to transmit and the transform effect is not created.
    Thank you for your feedback, I'll look into that and fix it asap
  • latop peterlatop peter
    After converting the center zoom to transform,
    there will be a problem of inaccurate center point when applied to graphic text,
    using the Transmitter alignment button does not seem to help,
    graphic text has its own position zoom information.
  • Leyero ShLeyero Sh
    latop peter said:
    After converting the center zoom to transform,
    there will be a problem of inaccurate center point when applied to graphic text,
    using the Transmitter alignment button does not seem to help,
    graphic text has its own position zoom information.
    Greetings, latop peter

    I checked in Premiere for myself, and I think the problem may be with the text itself not being in the center. If you "center align text" and reset its position it will look like it's in the middle, but it's not.
    For some reeason text's anchor point located not in the center. I'd suggest manually centering anchor point in the program panel while holding "ctrl", so it will snap in the center, and then reposition it so the anchor point of the text will be in the center.

    Hope that helps!

    If you'll have any technical issues in the future, please, open a support ticket. This way it will be easier for me to assist you.

  • Leyero ShLeyero Sh
    Leyero Sh said:

    It doesn't work in premiere 2023, I want to transmit and the transform effect is not created.
    Thank you for your feedback, I'll look into that and fix it asap
     I've tested in 2023 version of Premiere and everything should work.

    Here are few reasons why "Transform" effect may not be applying to the clip:

    1. Clip needs to be selected, when pressing "transmit"
    2. try changing clip duration/position on the timeline and then press "transmit". If you have duplicates of the same clip on the timeline with the same duration, Transmitter may have trouble recognizing selected clip.
  • Jorge SantosJorge Santos
    Hello, look, I leave you evidence. I tried your recommendations and it still does not transform, only the reset animation button works:
    https://drive.google.com/file/d/1O3dbC-xHmC9h0asz8NfjB-KGPmLCJwM_/view
    Leyero Sh said:
    Leyero Sh said:

    It doesn't work in premiere 2023, I want to transmit and the transform effect is not created.
    Thank you for your feedback, I'll look into that and fix it asap
     I've tested in 2023 version of Premiere and everything should work.

    Here are few reasons why "Transform" effect may not be applying to the clip:

    1. Clip needs to be selected, when pressing "transmit"
    2. try changing clip duration/position on the timeline and then press "transmit". If you have duplicates of the same clip on the timeline with the same duration, Transmitter may have trouble recognizing selected clip.

  • Leyero ShLeyero Sh
    Jorge Santos said:
    Hello, look, I leave you evidence. I tried your recommendations and it still does not transform, only the reset animation button works:
    https://drive.google.com/file/d/1O3dbC-xHmC9h0asz8NfjB-KGPmLCJwM_/view
    Leyero Sh said:
    Leyero Sh said:

    It doesn't work in premiere 2023, I want to transmit and the transform effect is not created.
    Thank you for your feedback, I'll look into that and fix it asap
     I've tested in 2023 version of Premiere and everything should work.

    Here are few reasons why "Transform" effect may not be applying to the clip:

    1. Clip needs to be selected, when pressing "transmit"
    2. try changing clip duration/position on the timeline and then press "transmit". If you have duplicates of the same clip on the timeline with the same duration, Transmitter may have trouble recognizing selected clip.

    Hello, Jorge

    Please try setting your porgram language to English and see if it will work. I guess it's not adding "Transform" effect, because your program language is not English, and "Transmitter" uses "add effect by name" method. Since this effect called differently in your case, it won't apply.

    I'll fix this issue in the future update.

    Also, please try adding "Transfom" effect yourself, and then press "Transmit", see if it will work so I can be sure, that issue in that 
  • Jorge SantosJorge Santos
    Hello again, thanks, if it was the language that made it not work, it already works, now I have another problem, when I transform the position values ​​are not the same, I have a solution that is by moving the anchor point to adjust it, the Detail of this is that it does not work well when interpolating, I would like a solution for this. I really want to buy the plugin from you, that's why I'm very interested and I tell everything that happens to me.I show you evidence again.

  • Leyero ShLeyero Sh
    Jorge Santos said:
    Hello again, thanks, if it was the language that made it not work, it already works, now I have another problem, when I transform the position values ​​are not the same, I have a solution that is by moving the anchor point to adjust it, the Detail of this is that it does not work well when interpolating, I would like a solution for this. I really want to buy the plugin from you, that's why I'm very interested and I tell everything that happens to me.I show you evidence again.

    Hello, Jorge

    The position values are suppose to be different, because "transform" effect uses different dimention compared to "Motion" property, you can check it by simply applying "Transform" effect, if the clip has different resolution, than the sequence. So if you turn off Hardware acceleration or set "shutter angle" to 0 the animation will be the same.

    In quick start guide I mentioned that problem with "Transform" effect and how you can fix it. My mistake was in saying, that "if you animate scale or rotation", when animation can mess up if you just change the values of scale and/or rotation.

    In your case I'd suggest you to nest the clip you want to animate, if it has different resolution than the sequence like in your video, and everything should work just fine.

    Cheers!
  • Brodie TVBrodie TV
    LOVE LOVE LOVE THIS PROJECT SOOOOO MUCH!!!

    Just a quick suggestion:
    I would just LOVE to see an option where you can change the default shutter angle that the motion keyframes get transmitted to, as I personally always use 360 shutter angle with my 4k60fps footage... Either way, you are a GOD for saving me hours of time! THANK YOU SIR!
  • Leyero ShLeyero Sh
    Brodie TV said:
    LOVE LOVE LOVE THIS PROJECT SOOOOO MUCH!!!

    Just a quick suggestion:
    I would just LOVE to see an option where you can change the default shutter angle that the motion keyframes get transmitted to, as I personally always use 360 shutter angle with my 4k60fps footage... Either way, you are a GOD for saving me hours of time! THANK YOU SIR!
    I appreciate the feedback, glad I could save you time!

    That's a great suggestion, I have an update coming soon and will definitely implement your suggestion
  • Brodie TVBrodie TV
    Leyero Sh said:
    Brodie TV said:
    LOVE LOVE LOVE THIS PROJECT SOOOOO MUCH!!!

    Just a quick suggestion:
    I would just LOVE to see an option where you can change the default shutter angle that the motion keyframes get transmitted to, as I personally always use 360 shutter angle with my 4k60fps footage... Either way, you are a GOD for saving me hours of time! THANK YOU SIR!
    I appreciate the feedback, glad I could save you time!

    That's a great suggestion, I have an update coming soon and will definitely implement your suggestion
    YOU ARE A MAN OF YOUR WORD LEYERO! SO EXCITED TO SEE YOU IMPLEMENTED THE IDEA, IT'S SAVING ME A MASSIVE HEADACHE, A THOUSAND MORE THANK YOUS!! - (p.s would also be excited to see a potential undo function in your extension, either way you ROCK, MY MAN!)
  • uf iczekuf iczek
    not working on 2023. page failed to load. Can't find "/extensions/com.aescripts.transmitter/panel/panel.html Error: ERR_FILE_NOT_FOUND (-6). (even though its in the files) . I've tried all versions of transmitter.
    Edit: Actually i started digging, and it's windows tagging the plugin, to be exact it's tagging the panel.html file as trojan virus and deleting it automatically.
    Hope it helps someone that might have the same issue as me.
  • Leyero ShLeyero Sh
    gru szi said:
    not working on 2023. page failed to load. Can't find "/extensions/com.aescripts.transmitter/panel/panel.html Error: ERR_FILE_NOT_FOUND (-6). (even though its in the files) . I've tried all versions of transmitter.
    Edit: Actually i started digging, and it's windows tagging the plugin, to be exact it's tagging the panel.html file as trojan virus and deleting it automatically.
    Hope it helps someone that might have the same issue as me.
    Thanks for providing information about this issue! It's the second time I'm hearing about it, will have to look into the cause of this
  • Jayson PerkinsJayson Perkins
    My only notes on this would be I wish it automatically would make the adjustment layer it recommends making. That would make this plugin 100x faster as opposed to the 10x
  • Leyero ShLeyero Sh
    Jayson Perkins said:
    My only notes on this would be I wish it automatically would make the adjustment layer it recommends making. That would make this plugin 100x faster as opposed to the 10x
    Hi Jayson,

    what exactly do you mean by making an adjustment layer? You would want for Transmitter to create adjustment layer on the timeline?

    Cheers,
    Leyero
  • 光男 金田光男 金田
    Even if it is executed with Transmit, the animation becomes larger or smaller without being copied as it is.
    I would like to recommend it to everyone during the summer sale from 8.7, so could you fix it as soon as possible?
  • Leyero ShLeyero Sh
    光男 金田 said:
    Even if it is executed with Transmit, the animation becomes larger or smaller without being copied as it is.
    I would like to recommend it to everyone during the summer sale from 8.7, so could you fix it as soon as possible?
    Hi,

    did you disable "Motion" property? If yes then try setting "shutter angle" to 0
  • 光男 金田光男 金田
    Yes!!
  • 光男 金田光男 金田
    Even if the shutter angle is 0, it still doesn't work...
  • Leyero ShLeyero Sh
    光男 金田 said:
    Even if the shutter angle is 0, it still doesn't work...
    Are you sure it doesn't work with shutter angle set to 0?

    Please note, that extension can't get keyframe's spatial or temporal interpolation, for that there's "add interpolation" button to 'bake in' interpolation from Motion property.

    Additionally, you can disable 'Motion' property like any other effect by pressing 'Fx' icon next to its name, so you can adjust animation later.

    If the problem still stays, try nesting clip before animation, thit should fix any issues.


    Cheers!
  • 光男 金田光男 金田
    It works, but it doesn't work properly.
    I'm sending you a message after trying everything around it.
    If this extension adjusts motion values such as Scale before copying, will the result not be reflected correctly?
  • Leyero ShLeyero Sh
    光男 金田 said:
    It works, but it doesn't work properly.
    I'm sending you a message after trying everything around it.
    If this extension adjusts motion values such as Scale before copying, will the result not be reflected correctly?
    can you please provide screen recording of it not working properly? Extension only adjusts 'Position' and 'Anchor Point' values, if clip itself has different resolution compared to sequence 
  • latop peterlatop peter
    Transmitter 1.1.1 ,There's something wrong with the "about license" dialog box. There's nothing in it.。
  • Leyero ShLeyero Sh
    latop peter said:
    Transmitter 1.1.1 ,There's something wrong with the "about license" dialog box. There's nothing in it.。
    yea idk why that happens, but if you click on one of those tabs above it will appear 
  • Damian SzymańskiDamian Szymański
    Leyero Sh said:
    latop peter said:
    Transmitter 1.1.1 ,There's something wrong with the "about license" dialog box. There's nothing in it.。
    yea idk why that happens, but if you click on one of those tabs above it will appear 
    even when I click on the tabs above, nothing displays, and despite having a purchased license, the trial version still appears. - Transmitter 1.1.1
  • Warp StarWarp Star
    Hey, I am very interested in a few of your plugins but i was wondering if you recommend both transmitter AND easify pro, or is easify pro is good enough on its own?

    thanks
  • Leyero ShLeyero Sh
    Warp Star said:
    Hey, I am very interested in a few of your plugins but i was wondering if you recommend both transmitter AND easify pro, or is easify pro is good enough on its own?

    thanks
    Hey there,

    It depends on what your workflow looks like. If you animate a lot of stuff with Transform effect or do zooms with it and an Adjustment layer than Transmitter can help you with that. 

    Easify Pro, on the other hand, adds custom easing to your animations.

    Either way there's a 10 days free trial for both of them so you can try them out and see what you really need.

    Cheers!
  • Warp StarWarp Star

    Leyero Sh said:
    Warp Star said:
    Hey, I am very interested in a few of your plugins but i was wondering if you recommend both transmitter AND easify pro, or is easify pro is good enough on its own?

    thanks
    Hey there,

    It depends on what your workflow looks like. If you animate a lot of stuff with Transform effect or do zooms with it and an Adjustment layer than Transmitter can help you with that. 

    Easify Pro, on the other hand, adds custom easing to your animations.

    Either way there's a 10 days free trial for both of them so you can try them out and see what you really need.

    Cheers!
    thank you! transmitter pro is awesome. The only issue i am currently having is if i hit transmit and then apply interpolation after, the plugin adds a bunch of keyframes that break the animation completley.
  • Stephen Leck-luluStephen Leck-lulu
    This doesn't work unless the footage is the same size as the sequence. Which frustratingly makes it useless for 95% of my work.
  • Leyero ShLeyero Sh
    Stephen Leck-lulu said:
    This doesn't work unless the footage is the same size as the sequence. Which frustratingly makes it useless for 95% of my work.
    Unfortunately that's the flaw of Pr, but there are ways to avoid this issue:
    1. nest(precomp) footage you want to animate
    2. disable hardware acceleration 
    3. Disable shutter angle (but that fix defeats the main purpose of Transmitter)
  • Stephen LeckStephen Leck
    Leyero Sh said:
    Stephen Leck-lulu said:
    This doesn't work unless the footage is the same size as the sequence. Which frustratingly makes it useless for 95% of my work.
    Unfortunately that's the flaw of Pr, but there are ways to avoid this issue:
    1. nest(precomp) footage you want to animate
    2. disable hardware acceleration 
    3. Disable shutter angle (but that fix defeats the main purpose of Transmitter)
    This limitation really should be written on the page description. And can't this be fixed in the plugin? Another plugin I use can rescale a video up or down so that it fills the frame of the sequence. Which means you should have access to the both pieces of information. With those two, can't you math it out to calculate the new keyframe position?
  • Leyero ShLeyero Sh
    Stephen Leck said:
    Leyero Sh said:
    Stephen Leck-lulu said:
    This doesn't work unless the footage is the same size as the sequence. Which frustratingly makes it useless for 95% of my work.
    Unfortunately that's the flaw of Pr, but there are ways to avoid this issue:
    1. nest(precomp) footage you want to animate
    2. disable hardware acceleration 
    3. Disable shutter angle (but that fix defeats the main purpose of Transmitter)
    This limitation really should be written on the page description. And can't this be fixed in the plugin? Another plugin I use can rescale a video up or down so that it fills the frame of the sequence. Which means you should have access to the both pieces of information. With those two, can't you math it out to calculate the new keyframe position?

    This limitation is mentioned in quick start guide and Transmitter also has 10 day free trial. It's already doing the math to animate clip with different size because Motion and Transform effects move relative to different things. There's no way to calculate the offset with shutter angle because it's random. Creating a nest is the best option
  • Stephen Leck-luluStephen Leck-lulu
    Any chance you can add an undo button since Premiere doesn't see these events?

    Also, what does the circle target button do?

    As to my previous comment, yes, should have trialed it (though I still like it so I'm glad to support it), and I missed the quick start guide. Where can I find this?
  • Leyero ShLeyero Sh
    Stephen Leck-lulu said:
    Any chance you can add an undo button since Premiere doesn't see these events?

    Also, what does the circle target button do?

    As to my previous comment, yes, should have trialed it (though I still like it so I'm glad to support it), and I missed the quick start guide. Where can I find this?
    Hello,

    Here are the Transmitter tutorials:



    Adding undo functionality in Pr is hard and I have no clue how to do it. If you want to have undo for "reset motion", you can just disable it like you would any other effect so you don't need to delete keyframes

  • Cameron PhillipsCameron Phillips
    Any chance of a new tutorial with the update UI?
  • Daria MaddisonDaria Maddison
    The premiere pro 2020 plugin displays correctly, but the buttons do not respond. The ‘transform’ effect is not applied
  • Rodrigo AkioRodrigo Akio
    Hey! Needing support for Premiere Pro 2025, can't make it open in it. It appears on Extentions list, but when I click on it, nothing happens. Any suggestions on how to solve it?
  • Leyero ShLeyero Sh
    Rodrigo Akio said:

    Hey! Needing support for Premiere Pro 2025, can't make it open in it. It appears on Extentions list, but when I click on it, nothing happens. Any suggestions on how to solve it?

    Hello,
    Please refer to a F.A.Q. channel in a discord server, invite link is on the product page
  • Lloyd AlvarezLloyd Alvarez
    Rodrigo Akio said:
    Hey! Needing support for Premiere Pro 2025, can't make it open in it. It appears on Extentions list, but when I click on it, nothing happens. Any suggestions on how to solve it?

    Please see the faq: Please see this faq:  https://aescripts.com/knowledgebase/index/view/faq/zxp-cep-extension-won-t-open/
Add a Comment