Stack Pro

Stop rebuilding the same adjustment layers for every project. Drop adjustment layers and color mattes over clips and cuts: Selected, Every Clip, Selected Cut, Every Cut. Cut out the busywork while editing in Premiere Pro!

Learn about license types
  $19.99
  • Free Trial
Description
Save Current
Stop Rebuilding
The Same Adjustment Layers
Every Project.
Build your look once — effects, Lumetri values, keyframes — then Save Current. Drop that exact look onto clips and cuts in one click.
$49$19.99
One Time Purchase
Stack Pro · Premiere Pro CEP Panel
Stack Adjustment Layers
In One Click
Drop adjustment layers and colour mattes over clips and cuts — Selected, Every Clip, Selected Cut, Every Cut — without the busywork.
If I could leave 10 stars I would. Great customer service. Love that this was created to help editors lighten their workload. Customer service 10 out of 10.
★★★★★
Weoutside
The Difference
Without vs With
The same manual loop on every project — until Stack Pro.
Without Stack Pro
✕Create Adjustment Layer
✕Move to correct track
✕Trim to clip or cut
✕Rebuild Lumetri stack
✕Repeat 50 times
With Stack Pro
✓One click
✓Automatic
✓Automatic
✓Saved Look
✓Apply to Every Clip / Every Cut
$49$19.99
Placement Modes
Four Modes.
Every Workflow Covered.
Selected, Every Clip, Selected Cut, Every Cut — without manual busywork.
01
Selected
Places a layer on the selected clip(s), matched to each clip's length — or one layer spanning the selection.
02
Every Clip
One layer spanning every clip on the timeline. Sequence-wide look without hunting clips.
03
Selected Cut
Short layers centred on every cut between selected clips. Transition grades, flashes, blur hits.
04
Every Cut
Same cut-centred layers across every cut on the timeline. Built for long edits.
Cut length configurable — 1f, 2f, 3f, 5f, 10f, or custom.
Placing Layers Takes Too Long
Creating, dragging, trimming, and re-applying effects across dozens of clips. Stack Pro removes those steps.
Before
After
Why Editors Switch
Less Repetition.
More Creativity.
More looks won't make you layer faster. Eliminate the manual steps.
The hardest part is getting that first consistent grade across the timeline. After that, the creative work gets easier.
Be more creative
Create, place, trim — handled. You focus on the grade and the story.
Stack to every cut
Short adj layers centred on every cut. Cut-sync grades and transition looks.
Save Current
Turn any finished adj into a reusable look. Stamp it on any future project.
Faster turnarounds
Deliver graded timelines faster. Less time on repetitive layer work.
Instant saved looks
Apply saved Lumetri grades, blur overlays, and colour mattes in one action.
What Stack Pro Improves
Finish grades 5× faster
Select, place, trim, apply — Stack Pro does all four in a single click.
Same-day edits
Grade the timeline while the director is still in the room.
Take on more projects
Fewer hours per job means more capacity — without burning out.
Timeline automation
Layer placement handled. You focus on colour and storytelling.
Saves on Average
1–3HOURS
Per adjustment layer pass. Per project.
Choose Your Effect
Any Effect As
Your Default Stack
In Settings, switch from Adjustment Layer to any effect you want — Lumetri, blur, or anything in your library. Stack Pro places that as your default every time.
Label Colour
Your Label.
Your Colour.
Pick any label colour in Settings for your adjustment layers — change the label and every stack Stack Pro creates appears in that colour on your timeline.
Minimal UI
Collapse The Panel.
Keep The Power.
Enable compact mode in Settings and Stack Pro shrinks to a slim strip — same placement modes and Save Current, less UI taking over your workspace.
Real Editors. Real Time Saved.
One-click placement and Save Current looks — used in real Premiere workflows.
@editor.jay
✓ Verified
"Every Cut mode is insane. Dropped a look on 200 cuts in literally 2 seconds."
@colorist.pb
✓ Verified
"Save Current is the feature I didn't know I needed. My go-to Lumetri grade — one click."
@akvstudios
"Honestly lifechanging. I never want to create an adjustment layer by hand again."
Trusted by
500+
Happy Editors
Sean Lawson — via aescripts
Great for layer automation
Used it on a 90-clip timeline and placed a look on every cut in seconds. Saved me a full hour on that job alone.
★★★★★
jamgflicks — via Web
Support team are legends
Had trouble with first install. Within a few hours Abbas helped via Discord and got everything sorted.
★★★★★
@betteredits — Verified
Save Current changed everything
I saved my go-to Lumetri grade with Save Current and now I stamp it across every project in one click.
★★★★★
★★★★★
Stop rebuilding the same
adjustment layers every project.
$49$19.99
One Time Purchase
Premiere Pro 2025+ · Mac & Windows · Instant download
Free Stack Pack included
LetsMotion
About Us
Adobe Partner studio building workflow tools for Premiere Pro, After Effects, and the Adobe ecosystem.
Abbas Seyyedi
Founder · Motion, Product & Development
Stack Pro
Places adjustment layers and colour mattes over clips and cuts in one click — with Save Current for reusable looks.
✓ Premiere Pro 2025+ · Mac & Windows
✓ 4 placement modes
✓ Save Current
✓ Colour Matte support
More From LetsMotion
See Our Other Stunning Plugins
LetsMotion Bundle
$120$90
Save 25% on LetsMotion Bundle, featuring bestsellers and our latest & greatest.
Particle Pro
Beautiful particles, made simple
Beautiful particle effects for After Effects — brush, point, and text alpha modes.
Subtitle Pro
$49.99
Create Professional Subtitles Directly in After Effects and Premiere Pro.

Discussions

Want to talk about it?

Head over to r/aescripts to chat with fellow users about this product.

Need Support?

Please open a support ticket to be connected directly with the author of this product

Version History

1.1.0 -

Sep 9, 2026

-Works with Premiere Pro in any language, including non-English Windows.
-The Default Effect list now fills correctly.
-Only Stack Pro’s own adjustment layers are moved into the Stack Pro project bin. Your existing adjustments stay where you put them.

1.0.0 -

Sep 8, 2026

-Works with Premiere Pro in any language, including non-English Windows.
-The Default Effect list now fills correctly.
-Only Stack Pro’s own adjustment layers are moved into the Stack Pro project bin. Your existing adjustments stay where you put them.

Compatibility

Premiere Pro

2027, 2026, 2025, 2024, 2023

EULA

END USER LICENSE AGREEMENT

This software ("the Software Product") and accompanying documentation is licensed and not sold. This Software Product is protected by copyright laws and treaties, as well as laws and treaties related to other forms of intellectual property. The author owns intellectual property rights in the Software Product. The Licensee's ("you" or "your") license to download, use, copy, or change the Software Product is subject to these rights and to all the terms and conditions of this End User License Agreement ("Agreement").

Acceptance
YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT BY SELECTING THE "ACCEPT" OPTION AND DOWNLOADING THE SOFTWARE PRODUCT OR BY INSTALLING, USING, OR COPYING THE SOFTWARE PRODUCT. YOU MUST AGREE TO ALL OF THE TERMS OF THIS AGREEMENT BEFORE YOU WILL BE ALLOWED TO DOWNLOAD THE SOFTWARE PRODUCT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU MUST SELECT "DECLINE" AND YOU MUST NOT INSTALL, USE, OR COPY THE SOFTWARE PRODUCT.

License Grant
This Agreement entitles you to install and use one copy of the Software Product. In addition, you may make one archival copy of the Software Product. The archival copy must be on a storage medium other than a hard drive, and may only be used for the reinstallation of the Software Product. This Agreement does not permit the installation or use of multiple copies of the Software Product, or the installation of the Software Product on more than one computer at any given time, on a system that allows shared used of applications, on a multi-user network, or on any configuration or system of computers that allows multiple users. Multiple copy use or installation is only allowed if you obtain an appropriate licensing agreement for each user and each copy of the Software Product.

Restrictions on Transfer
Without first obtaining the express written consent of the author, you may not assign your rights and obligations under this Agreement, or redistribute, encumber, sell, rent, lease, sublicense, or otherwise transfer your rights to the Software Product.

Restrictions on Use
You may not use, copy, or install the Software Product on any system with more than one computer, or permit the use, copying, or installation of the Software Product by more than one user or on more than one computer. If you hold multiple, validly licensed copies, you may not use, copy, or install the Software Product on any system with more than the number of computers permitted by license, or permit the use, copying, or installation by more users, or on more computers than the number permitted by license.

You may not decompile, "reverse-engineer", disassemble, or otherwise attempt to derive the source code for the Software Product.

Restrictions on Alteration
You may not modify the Software Product or create any derivative work of the Software Product or its accompanying documentation. Derivative works include but are not limited to translations. You may not alter any files or libraries in any portion of the Software Product.

Restrictions on Copying
You may not copy any part of the Software Product except to the extent that licensed use inherently demands the creation of a temporary copy stored in computer memory and not permanently affixed on storage medium. You may make one archival copy which must be stored on a medium other than a computer hard drive.

Disclaimer of Warranties and Limitation of Liability
UNLESS OTHERWISE EXPLICITLY AGREED TO IN WRITING BY THE AUTHOR, THE AUTHOR MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, IN FACT OR IN LAW, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OTHER THAN AS SET FORTH IN THIS AGREEMENT OR IN THE LIMITED WARRANTY DOCUMENTS PROVIDED WITH THE SOFTWARE PRODUCT.

The author makes no warranty that the Software Product will meet your requirements or operate under your specific conditions of use. The author makes no warranty that operation of the Software Product will be secure, error free, or free from interruption. YOU MUST DETERMINE WHETHER THE SOFTWARE PRODUCT SUFFICIENTLY MEETS YOUR REQUIREMENTS FOR SECURITY AND UNINTERRUPTABILITY. YOU BEAR SOLE RESPONSIBILITY AND ALL LIABILITY FOR ANY LOSS INCURRED DUE TO FAILURE OF THE SOFTWARE PRODUCT TO MEET YOUR REQUIREMENTS. THE AUTHOR WILL NOT, UNDER ANY CIRCUMSTANCES, BE RESPONSIBLE OR LIABLE FOR THE LOSS OF DATA ON ANY COMPUTER OR INFORMATION STORAGE DEVICE.

UNDER NO CIRCUMSTANCES SHALL THE AUTHOR, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU OR ANY OTHER PARTY FOR INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL, PUNITIVE, OR EXEMPLARY DAMAGES OF ANY KIND INCLUDING LOST REVENUES OR PROFITS OR LOSS OF BUSINESS) RESULTING FROM THIS AGREEMENT, OR FROM THE FURNISHING, PERFORMANCE, INSTALLATION, OR USE OF THE SOFTWARE PRODUCT, WHETHER DUE TO A BREACH OF CONTRACT, BREACH OF WARRANTY, OR THE NEGLIGENCE OF THE AUTHOR OR ANY OTHER PARTY, EVEN IF THE AUTHOR IS ADVISED BEFOREHAND OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT THAT THE APPLICABLE JURISDICTION LIMITS THE AUTHOR'S ABILITY TO DISCLAIM ANY IMPLIED WARRANTIES, THIS DISCLAIMER SHALL BE EFFECTIVE TO THE MAXIMUM EXTENT PERMITTED.

Limitation of Remedies and Damages
Any claim must be made within the applicable warranty period. All warranties cover only defects arising under normal use and do not include malfunctions or failure resulting from misuse, abuse, neglect, alteration, problems with electrical power, acts of nature, unusual temperatures or humidity, improper installation, or damage determined by the author to have been caused by you. All limited warranties on the Software Product are granted only to you and are non-transferable. You agree to indemnify and hold the author harmless from all claims, judgments, liabilities, expenses, or costs arising from your breach of this Agreement and/or acts or omissions.

Governing Law, Jurisdiction and Costs
This Agreement is governed by the laws of New York, without regard to New York's conflict or choice of law provisions.

Severability
If any provision of this Agreement shall be held to be invalid or unenforceable, the remainder of this Agreement shall remain in full force and effect. To the extent any express or implied restrictions are not permitted by applicable laws, these express or implied restrictions shall remain in force and effect to the maximum extent permitted by such applicable laws.

Updated: Oct 21, 2025 1:35 AM

Floating License Server Required

The Floating Server License for Stack Pro requires a Floating License Server (FLS) to activate and use.

You don't currently own one and don't have one in your cart. You can purchase one for $99.99, or learn more about license types.

You Already Own This Product

It looks like you already own Stack Pro. If you're purchasing an additional license (for second machine or a different license type), go ahead. If this was an accident, you can check your existing licenses to confirm what you have.

View My Licenses